top of page

                  SW20 Reverse Light Wiring Notes
Info brought to you by Eric Hux of Hux Racing, LLC

This first diagram will be of the 02-06 rsx engine harness. The reverse light switch is wired to c101 pins 1 and 2. Polarity is not important as it is just a switch. I will typically run 12v from the main relay to C101 pin 2. Then connect C101 pin 1 to the molex connector Pin (4). The extension of the reverse light wire and its pin position in the molex is detailed in the SW20 Chassis Harness video.

bottom of page